Live Dispatch:888-628-4008
custom tow truck modifications Pomona CA — Quik Tow Repair
Welding & Fabrication — SoCal Tow Truck Specialists

Custom Tow Truck
Modifications
In Southern California

Any modification, custom build, or reconfiguration for tow trucks, wreckers, rollbacks, and commercial rigs — fabrication, welding, electrical, and hydraulic work all handled in-house at our Pomona shop. If you can describe what you need changed, call us. Free estimates.

Any Modification
Full In-House Capability
Free Estimates
Pomona, CA Shop
Full Documentation
Call 888-628-4008Get a Free Quote
Any
Modification
All
Systems In-House
100%
Tow Truck Focused
Free
Estimates Always
About This Service

Custom Tow Truck Modifications — Any Modification, One Shop, Start To Finish

Not every modification a tow truck operator needs fits a standard service category. Sometimes it’s a storage configuration that doesn’t exist off the shelf. Sometimes it’s a chassis modification to accommodate different equipment. Sometimes it’s reconfiguring a used truck for a different application. Sometimes it’s a one-off solution to an operational problem that no standard part addresses. These are custom modification jobs — and they’re exactly what Quik Tow Repair was built to handle.

Custom modifications are Gio’s confirmed specialty — cualquier modificación, as he put it. Any modification. The shop has the capability to handle modifications that span multiple systems — fabrication and welding for structural work, following NTEA custom truck equipment guidelines, combined with in-house electrical for controls and lighting, and hydraulic capability for equipment connections. One shop, one estimate, one point of contact. No coordinating between a fabricator, an electrician, and a hydraulic shop.

Most custom modification projects start with a phone conversation. Describe what you need changed or built. We’ll tell you whether we can do it, what it will take, and what it will cost — in writing, before any work begins. No open-ended project budgets, no surprise scope changes, no bills you didn’t approve.

Quik Tow Repair custom modification shop Pomona CA
What We Modify

Custom Modification Services We Offer

These are the most common custom modification categories we handle. If your project doesn’t fit one of these exactly — call us. If it involves a tow truck and requires fabrication, welding, electrical, or hydraulic work, we can almost certainly do it.

custom tow truck modification fabrication Southern California

Chassis & Body Modifications

Structural modifications to the truck chassis or body — reinforcement for heavier applications, body reconfiguration for different equipment, clearance modifications, subframe additions, and any structural change that requires welding and fabrication. All chassis modifications are followed by geometry verification.

  • ✓Chassis reinforcement for heavier load ratings
  • ✓Body reconfiguration for equipment changes
  • ✓Clearance modifications for low-profile work
  • ✓Subframe and mounting system additions
  • ✓Geometry verification after every structural mod
Get a free estimate →
custom tow truck modification fabrication Southern California

Equipment Relocation & Remount

Moving equipment from one location on the truck to another — winch relocation, boom repositioning, hydraulic component remounting, control panel relocation, and any other equipment that needs to be in a different spot for operational reasons. We handle the fabrication, wiring, and hydraulic reconnection as part of the same job.

  • ✓Equipment removal from current mounting
  • ✓New mount fabrication and installation
  • ✓Wiring relocation and reconnection
  • ✓Hydraulic line rerouting if needed
  • ✓Full function test after relocation
Get a free estimate →
custom tow truck modification fabrication Southern California

Custom Storage Solutions

Beyond standard tool boxes — custom storage configurations that use the available space on a truck in ways off-the-shelf solutions don’t address. Integrated storage systems, compartmentalized under-body storage, custom racks, and any storage solution that requires fabrication to build and install.

  • ✓Available space assessment on the truck
  • ✓Custom storage design around what you carry
  • ✓Full fabrication and installation
  • ✓Integration with existing body and frame
  • ✓Access and security hardware included
Get a free estimate →
custom tow truck modification fabrication Southern California

Lighting & Strobe Modifications

Custom lighting and strobe configurations — additional work lights in non-standard positions, arrow board installation, custom strobe head placement, scene light additions, and any lighting modification that requires both fabrication (for mounting) and electrical (for wiring). We handle both in-house.

  • ✓Custom mount fabrication for new lighting positions
  • ✓Full electrical wiring for new lighting circuits
  • ✓Strobe system expansion or reconfiguration
  • ✓Arrow board and directional light installation
  • ✓Full lighting test after modification
Get a free estimate →
custom tow truck modification fabrication Southern California

Hydraulic System Modifications

Adding hydraulic functions, relocating hydraulic components, upgrading hydraulic capacity for heavier applications, and any modification that involves the hydraulic circuit. We design and install hydraulic modifications that integrate correctly with the existing system — not just add components and hope they work together.

  • ✓Hydraulic system assessment before modification
  • ✓New function addition and valve integration
  • ✓Component relocation with line rerouting
  • ✓System pressure and flow test after modification
  • ✓Full function test on all hydraulic circuits
Get a free estimate →
custom tow truck modification fabrication Southern California

Used Truck Reconfiguration

Buying a used tow truck and need it reconfigured for your specific operation? Different body, different equipment, different wheelbase — we handle full truck reconfiguration projects that combine chassis modification, equipment transfer, electrical work, and hydraulic integration into a complete build.

  • ✓Full truck assessment before reconfiguration
  • ✓Scope and timeline discussion before estimate
  • ✓Multi-system modification under one estimate
  • ✓Full documentation package on completion
  • ✓Road test before pickup
Get a free estimate →
Why Choose Us

Why SoCal Operators Choose Quik Tow Repair For Custom Modifications

Cualquier Modificación — Any Modification

Any modification. That’s Gio’s actual words about what the shop does. If it goes on a tow truck and requires fabrication, welding, electrical, or hydraulic work, we handle it.

All Systems In-House

Fabrication, structural welding, electrical, hydraulic — all in-house at our Pomona shop. You don’t coordinate between three different shops for a modification that touches multiple systems.

Written Estimate Before Everything

Every custom modification project starts with a written estimate covering the full scope and cost. No open-ended budgets, no surprise additions. You approve a specific number before we start.

Tow Truck Only

We work exclusively on tow trucks. We understand the specific constraints, clearances, load ratings, and system interactions on every major tow rig type. That matters on a custom modification.

Full Documentation

Every modification project comes with documentation covering what was done, materials used, and any structural or compliance verification. Useful for insurance, DOT, and resale.

Fleet Projects

Fleet operators reconfiguring multiple trucks or standardizing a custom modification across a fleet get project-based pricing and coordinated scheduling that minimizes fleet downtime.

Our Process

How Custom Modifications Work At Our Shop

Custom modifications are project work — here is how we handle them from first contact to finished truck.

01
Step 01

Call or Describe

Call 888-628-4008 or submit our form. Describe what you need changed or built. Most projects start with a phone conversation before the truck comes in — so we understand the scope before we look at the chassis.

02
Step 02

Consultation & Written Estimate

We inspect the truck and discuss the modification in detail. You receive a comprehensive written estimate covering full scope, materials, timeline, and cost before any work begins. No surprises.

03
Step 03

You Approve, We Build

No work starts without your written approval of the full estimate. We handle every system involved — fabrication, welding, electrical, hydraulic — updating you at key milestones. No additional work without your go-ahead.

04
Step 04

Full Verification, Documentation & Pickup

Every modification is tested across all affected systems before pickup. Written documentation of the full modification provided. Road test included on reconfiguration projects.

Who We Serve

Custom Modifications For Towing Companies & Owner-Operators

Towing Companies & Fleets

Fleet operators standardizing a custom configuration across multiple trucks, reconfiguring used chassis for new applications, or building out a specialized recovery truck get project-based pricing and coordinated scheduling. We handle the full project — one estimate, one shop, one point of contact.

  • ✓Multi-truck modification projects
  • ✓Used chassis reconfiguration for fleet use
  • ✓Project-based pricing and scheduling
  • ✓Coordinated delivery to minimize downtime
  • ✓Full documentation on every truck modified
  • ✓Single point of contact for all systems
Set Up A Fleet Account →

Owner-Operators

Have something specific you need on your truck that doesn’t exist as an off-the-shelf solution? Describe it. We’ll tell you whether we can do it, what it will take, and what it will cost — before any work starts.

  • ✓Phone consultation before estimate
  • ✓Written estimate before any work
  • ✓All systems handled in-house
  • ✓Full documentation on completion
  • ✓Road test on reconfiguration projects
  • ✓No additional charges without approval
Get a Free Estimate →
Free Estimate

Tell Us What You Need Modified

Describe the modification — what you want changed, added, or built. We respond within 1 business hour to schedule a consultation. Free estimate, no obligation.

  • Phone consultation before estimate
  • Written estimate before any work begins
  • All systems in-house — fabrication, electrical, hydraulic
  • No additional charges without written approval
Prefer to call? 888-628-4008
Describe Your Custom Modification
We respond within 1 business hour
Step 1 of 3
What service do you need?
Service Areas

Custom Tow Truck Modifications Across SoCal

Our Pomona shop handles custom modification projects for towing companies and owner-operators across all four Southern California counties. Call us to discuss your project before bringing the truck in.

Los Angeles County

Los Angeles · Long Beach · Glendale · Pasadena · Pomona · Torrance

San Bernardino County

San Bernardino · Ontario · Rancho Cucamonga · Fontana · Victorville · Chino

Orange County

Anaheim · Santa Ana · Irvine · Fullerton · Garden Grove · Orange

Riverside County

Riverside · Corona · Moreno Valley · Temecula · Murrieta · Palm Springs

Los Angeles · San Bernardino · Ontario · Riverside · Anaheim · Santa Ana · Long Beach · Corona · Rancho Cucamonga · Fontana · Moreno Valley · Irvine

Real Reviews

What SoCal Operators Say About Our Custom Modification Work

★★★★★
“Bought a used integrated unit that was set up for a different market — wrong storage configuration, controls in the wrong position, lighting that didn’t work for our operation. Quik Tow did a full reconfiguration — new storage layout, relocated controls panel, added two work lights, rerouted some hydraulic lines. Took 8 days and came back exactly what I needed. One shop handled everything.”
Andre T. / Owner-Operator
Ontario, CA
Full Truck Reconfiguration
★★★★★
“Needed a winch relocated from the standard position to a different mounting point on my wrecker for a specific recovery application we do regularly. Quik Tow fabricated the new mount, moved the winch, rerouted the hydraulic lines, updated the control wiring, and tested everything. Exactly what I needed and it all works perfectly.”
Kim R. / KR Recovery
Fontana, CA
Winch Relocation & Hydraulic Rerouting
★★★★★
“We standardized a custom storage and lighting configuration across 4 of our trucks. Quik Tow built the first one, we approved the design, they built the other three. All four trucks came out identical — same storage, same lighting positions, same wiring, same mounts. Our drivers can switch trucks and know exactly where everything is.”
Fleet Director, SoCal Recovery Operations
Rancho Cucamonga, CA
Fleet Custom Configuration
Also In This Silo

Related Services Used In Custom Modifications

Custom modifications draw from every capability we have. These are the services most commonly involved in modification projects.

Tow Truck Welding

Tow Truck Welding

Structural chassis welding — foundation of every modification involving the frame or body.

Metal Bracket Fabrication

Metal Bracket Fabrication

Custom brackets — part of almost every modification project.

Electrical & Wiring

Electrical & Wiring

Controls, lighting, and strobe work — electrical is part of most complex modifications.

Hydraulic, PTO & Cylinder

Hydraulic, PTO & Cylinder

Hydraulic system modifications — equipment relocation and additions often involve hydraulic rerouting.

Frame Extending & Shortening

Frame Extending & Shortening

Chassis length modifications — the most structural modification type we handle.

← View all Welding & Fabrication services
FAQ

Custom Tow Truck Modifications — Frequently Asked Questions

We handle any custom modification that involves fabrication, welding, or structural work on a tow truck. Common projects include: custom storage solutions, equipment relocation, body modifications for clearance or access, custom equipment mounting, lighting and strobe repositioning, chassis reinforcement for heavier applications, body reconfiguration, and anything else an operator needs changed on their rig that can’t be done with off-the-shelf parts. If you can describe what you want changed or added, we can tell you whether we can do it and what it will take.

Need Something On Your Truck Changed? Describe It. We Build It.

Call us or submit a form. We respond within 1 business hour to schedule a consultation — fabrication, electrical, hydraulic, all in-house. Written estimate before anything starts.

Call 888-628-4008Get a Free Quote
Estimates Within 1 Business Hour All Systems In-House Written Estimate Before Work
Call 888-628-4008